pcbknow

Everything PCB !

In this passage will tell you everything about green PCB

What are the reasons why PCB is green?

Physical advantage of green PCB

As green is proclaimed as the “standard color”, researchers have been analyzing through R&D to make better solder mask oils based on the color  green. The actual chemical pigments used will influence the performance of the resin during PCB application. As a result, the demand for green solder mask increases and it has superior properties as compared to other colors.

Due to the traditional aspect of using green pigments, R&D into making better solder mask oils focused on the standard green color. The actual chemical pigments used influence the performance of the resin during application and in the field. When demand is pushing form factors to their limits, no one cares about having pink boards. As a result, green solder mask now has superior properties compared to other aesthetically orientated colors.

Most prominently, commercial green solder mask is the only available color that can reliably produce solder mask dams of 0.1mm. The most prominent factor of choosing green solder mask is that it is the only available color that can reliably produce solder mask dams of only 0.1mm. Next up is red, yellow and blue that can produce 0.12mm dams and then black and white which can typically only achieve 0.15mm. Solder mask dams are vital for ICs and fine pitch components since they are valuable in preventing solder bridges from forming.

The green in most green soldermask oils comes from chlorine. Chlorine, along with Bromine, which is found in PCB substrates, are halogens which have a severely detrimental impact on health and the environment if disposed of inappropriately. Halogen free soldermask oils and substrates are available. For halogen free solder mask, you could just switch to another color.

Contrast advantage of green PCB

As technology advances, PCB manufacturers nowadays use flying probe techniques and Automatic Optical Inspection (AOI) to perform quality inspections. However, there are other technical reasons why most PCBs manufacturers prefer green PCBs.

In the early days, due to technological restrictions, quality inspections relied on workers manually checking the boards with their bare eyes. Squinting at tiny circuits all days is tiring work, but neurologists and psychologists agree that the wavelength of green light has relaxing effects on the body and can reduce fatigue. Additionally, they have found that the sensors in human eyes, or cones, are most sensitive to green light. Therefore, the contrast is greater between the circuit traces, pads, silkscreen printing and empty spaces. Just by observing the boards from the outside, one can easily identify defects in the outer layers. Compare the below images of green boards to other colors such as blue, yellow or even black and white. With higher contrast, errors are easier to spot.

Neurologists and psychologists studied and agreed that the wavelength of green light has a relaxing effect on the body, enable to reduce human fatigue. In addition, studies have shown that the sensors in human eyes are most sensitive to green light. Thus, the contrast for green is much better to see circuit traces, pads, silkscreen printing and empty spaces. Workers can easily identify defects by observing the boards from the outside.

Of course, nowadays PCB manufacturers use flying probe techniques and Automatic Optical Inspection (AOI) for these tasks, which is very effective in spotting errors. But there is another very important technical reason why most PCBs are green.

Price advantage of green PCB

Solder mask is created using silkscreen technique. This method involves a large blob of oil applied on a screen mesh with the circuit board underneath. After application. the circuit board is then removed to dry up, and the next circuit board will be placed under the mesh.

In an scenario where a company need different colour solder mask, the excess solder mask oil initially used must be removed and the silkscreen must be washed before applying new colour. Another solution to save such hassle will be the installation of another silkscreen station for other colors. However, the chemicals will be wasted if it is not often used. Time & efficiency will also be impaired.

If you want to learn more PCB knowledge or want to order PCB products, please check PCBBUY homepage for more information

Leave a Reply

Your email address will not be published.